Ceilings can be made more interesting by exturing them. If you make it yourself, this is also pocket-friendly. Texturing walls gives life and style to otherwise boring walls. It is not difficult, even though it may sound tedious. The process is quite straightforward. With the correct tools and equipment, this is possible. Let us show you! Texture a wall using common materials.
These methods can be applied to any type of seam in drywall, even those found within your ceiling. This blog explains everything.
Retexturing walls and ceilings can be done with a range of tools such as whisk-brooms, combs, sponges, etc. This tool can be used for creating stunning, polished walls. This blog will demonstrate how to texture drywall using different textures. Let’s start the texturing process.
There are many types of texture paints
Select a design or texture first. These are used to improve the beauty and repair unsightly seams. You can choose from many different textures, such as:
- Smooth texture paint
- Sand texture paint
- Knockdown texture
- Popcorn texture
- Orange peel texture
For more information on ceiling textures, visit our blog. After you’ve decided on the texture that you want for your ceiling, or wall you can choose between 20+. After you’ve chosen the texture, it’s time to start the process.
What You’ll Need
This is a complete list of tools and materials that you need in order to texture a wall. The items could already be in your possession or available on the market.
|Get drop cloths||Painter’s tape|
|Sheets of plastic||Drywall compound|
|Drywall knife||Paint primer for flat or drywall|
|Attachment to drill-and-paint mixer||Paint|
|Get a paint tray|
|Paint roller and covering|
Your Work Hours 30 minutes
Time total: 4 hours
Cost estimate: $20-30
How to texture a wall
Let’s see how you can texture a wall with four different methods. You can create almost any texture on your wall or ceiling with these simple steps, regardless of what color. Let’s begin with the beginning.
1. How to texture a wall with Joint Compound
- The walls should be cleaned first and dried completely.
- Mix the compound with water as per the directions. You should make the mixture thicker than a batter.
- You can spread the mixture with a spoon or a fork.
- The tools can be used to create almost any texture.
TIP For example, to create a cross-hatched texture with your joint compound, you can use a notched trowel to make lines.
- Once you’ve textured your wall, make sure there is no need to reapply. Use the joint compound in the required spaces.
- Let the paint dry for 24 hours before painting.
2. A Texture Sprayer is used to texture walls
You will need a sprayer to add popcorn texture or orange peel texture on your walls. Also, it is one of the easiest ways to texture a ceiling or wall.
These steps are simple to follow
- Make sure to clean off the walls’ surface before you start. It doesn’t matter whether you texturize the ceiling or walls, make sure to clean them first before you let them dry.
- Use a sheet to cover all floors and furniture.
- Add the mixture to water, and mix it in a sprayer bucket.
- After you’ve adjusted your nozzle, start spraying slowly on walls.
- When you’re done with spraying, wait at least 24 hours for it to dry before you paint.
3. A sponge can be used to create texture on a wall
With a paint sponge, you can create faux textures. This takes less drying time and is quicker to complete. We will now show you how to sponge.
- It is possible to create two textures by painting a wall with one color and then letting it dry.
- You can give your sponge a bold and sophisticated look by soaking it in different paints or just one, depending on its texture.
- Continue to dab dab.. repeat the process until you achieve a random texture on your wall.
TIP For more natural patterns, you can use sea sponges. Synthetic sponges are better for rectangular and uniform patterns. Both of these are available readily on the marketplace.
4. How to texture a wall with a roller
You can also texture walls with a paint roll. This is a simple and popular technique that’s easy to follow. You can create a faux finish or texture using this technique.
Texturing by using Joint Paint or Textured Acrylic
- You are familiar with the first two steps. Mix the joint compound with water and clean the walls.
- Next, pour the mixture into a tray of paint and let it sit for a while before you start to roll. You can now roll over the wall.
- Let the compound settle for some time on the wall, and then roll it over.
- It will make your home look amazing. 3D texture on the walls that looks absolutely amazing.
- Use a brush for the corners. Let it dry between 24-48 hours.
For a faux finish, paint with texturing
- Let dry the wall and ceiling after cleaning them.
- To trace your wall, you can use either a stencil (or a thick naproll). You can also use the secondary color. That’s it!! Your faux wall is now complete !
TIP If you are looking for something unique and different, you can use a variety of painting tools and techniques.
Useful Tips and Tricks for Wall Texture
- Make sure you prepare your wall with a primer before applying joint compound.
- It is best to get rid of any texture that you may have in order to achieve a polished appearance.
- To repair popcorn or acoustic ceilings, you can use touch up spray.
- For highlighting textures, you can use satin paint on walls or ceilings.
It’s simple, fast, and budget-friendly
After mastering the art and technique of texture, you can play with different textures or patterns. You will love this easy DIY project. It is very affordable, and you only need a few materials.
A professional is best if your plans include large-scale land coverage. Your ceilings can be decorated by you. You can dry it quickly and in less time. You can create stunning walls using texture with this guide